Hot!

Recent Updates

browse for more...

HOW TO ROOT HUAWEI Y5II

HOW TO ROOT AND INSTALL TWRP / CWM ON HUAWEI Y5II

That is the question. Rooting your Android device definitely pushes you up a level or two in your geekdom. It requires a certain level of commitment, at least a little savvy, and even a modicum of risk. So, why would you want to bother?


What Is Rooting?
Rooting means gaining root access to your device. When you take your phone out of the box, while there are plenty of settings you can tweak, you can only alter what the manufacturer allows you to. By gaining root access you can modify the device's software on the very deepest level. It takes a bit of hacking (some devices more than others), it voids your warranty, and there's a small chance that you could completely break your phone forever. But you know what? It's still totally worth it for all the goodies you get access to.

This method must works on Follow Devices.. Tested ON [ BOD] 

Huawei Y5II CUN-L01

Huawei Y5II CUN-L02

Huawei Y5II CUN-L03

Huawei Y5II CUN-L21

Huawei Y5II CUN-L22

Huawei Y5II CUN-L23

Huawei Y5II CUN-L33

Huawei Y5II CUN-L29

HOW TO ROOT HUAWEI Y5II

  •  Get bootloader unlock code From Here
  •  Enter fastboot mode Using [vol Up + Power ] 
  • Open Command Promt and unlock bootloader
code:    fastboot oem unlock xxxxxxxxxx unlock code giving to you by Huawei
  •  Download and flash TWRP or CWM Recovery 
code:  fastboot flash recovery xxxxxxxx.img
  •  Enter TWRP/CWM recovery mode using [vol Up + Power ] 
  • Flash Supersu.zip 

You are now rooted! an have Custom Recovery on HUAWEI Y5II, go straight to Google Playstore and download Root Checker to verify your root status.


Download ADMET G3 Firmware / Pac File

ADMET G3 Firmware / Pac File 

Below is the direct link to download the ADMET G3 Stock Firmware (flash file) this Firmware contains Flash Tool, Driver and instructions.
Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.


Below is the Firmware Stock ROM [Pac File]  for ADMET G3

  • Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
  • Download Stock Rom (Pac) for your Android Device.
  • Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files:
  • Now, open UpgradeDownload.exe.
  • Once Spreadtrum Upgrade Tool is launched, connect your Android device to the computer (make sure your device is switch off).
  • Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the .Pac file (Stock ROM which comes as .Pac).
  • Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
  • During the flashing process your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
  • Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool. Once your Android Device is successfully restarted, Go to Settings > About Phone > Check firmware.
ADMET G3 Firmware / Pac File

Download iTEl 1520 Firmware / Pac File


Below is the direct link to download the Itel 1520 Stock Firmware (flash file) this Firmware contains Flash Tool, Driver and instructions.
Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.

ITEL 1520 QUICK SPECSDimension - 142.1 x 71 x 9.4 mm
5 - inch Touchscreen, 1280x720 pixels
Weight - 194g
1.3 GHz quad-core Processor
SPREADTRUM
2GB RAM
16GB Internal Memory
 
Up to 32GB microSD
13MP back Camera with dual flash, auto focus
13MP Front Camera
Dual SIM
EDGE , GPRS - 850 / 900 / 1800 / 1900MH
WCDMA 900/2100
WIFI 802.11 b/g/n
bluetooth 2.1 + EDR
5050mAh Battery

Below is the Firmware Stock ROM [Pac File]  for  iTEL 1520 

  • Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
  • Download Stock Rom (Pac) for your Android Device.
  • Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files:
  • Now, open UpgradeDownload.exe.
  • Once Spreadtrum Upgrade Tool is launched, connect your Android device to the computer (make sure your device is switch off).
  • Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the .Pac file (Stock ROM which comes as .Pac).
  • Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
  • During the flashing process your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
  • Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool. Once your Android Device is successfully restarted, Go to Settings > About Phone > Check firmware.

ITEL 1520 STOCK ROM / PAC FILE
IT1520-H358A1-M-IN-160908V65

ITEL 1512 Stock ROM / Firmware

ITEL IT1512 STOCK ROM / Firmware

Below is the direct link to download the Itel IT1512 Stock Firmware (flash file) this Firmware contains Flash Tool, Driver and instructions.
Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.

QUICK SPECS OF  iTEL 1512
Dimension - 143 x 72 x 8.6 mm
5.5 - inch Touchscreen, 480 x 854 pixels
Weight - 194g
1.0 GHz Quad-Core Processor
MediaTek
Mali T720 GPU
1GB RAM
16GB Internal Memory 
up to 32GB microSD
5MP Rear Camera, Dual LED Flash, Auto Focus
2MP Front Camera 
Dual SIM

EDGE , GPRS - 850 / 900 / 1800 / 1900MH
WCDMA 900/2100

4G LTE
WIFI 802.11 b/g/n
bluetooth 4.0
2500mAh Battery

How to Flash iTEl iT1511
  •  Download and extract the stock firmware on your computer.
  • After extracting you will find the SP Flash Tool, Driver and instruction manual.
  •  Install the USB Drivers (skip if drivers are already installed).
  • Open the SP Flash Tool and load the Scatter File from the firmware folder.
  • Connect your Smartphone to the computer using the USB Driver.
  • Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.

ITEL 1512 FIRMWARE / STOCK ROM
IT1512-H356-A1-M-IN-20160705

Download ITEL 1511 Selfie Pro Firmware

ITEL IT1511 Selfie Pro STOCK ROM / Firmware


Below is the direct link to download the Itel Selfie Pro IT1511 Stock Firmware (flash file) this Firmware contains Flash Tool, Driver and instructions.
Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.

QUICK SPECS OF iTEL iT1511Dimension - 151 x 77 x 9.3 mm
5.0 - inch Touchscreen, 720 x 1280 pixels
Weight - 155g
1.0 GHz Quad-Core Processor
MediaTek
Mali T720 GPU

1GB RAM
8GB Internal Memory
up to 32GB microSD
8MP Rear Camera, Dual LED Flash, Auto Focus
2MP Front Camera
Dual SIM
EDGE , GPRS - 850 / 900 / 1800 / 1900MH
WCDMA 900/2100
4G LTE
WIFI 802.11 b/g/n
bluetooth 4.0
2500mAh Battery.

How to Flash iTEl iT1511
  •  Download and extract the stock firmware on your computer.
  • After extracting you will find the SP Flash Tool, Driver and instruction manual.
  •  Install the USB Drivers (skip if drivers are already installed).
  • Open the SP Flash Tool and load the Scatter File from the firmware folder.
  • Connect your Smartphone to the computer using the USB Driver.
  • Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.

ITEL IT1511 STOCK ROM / FIRMWARE
iTEL_ IT1511-H357-A1-M-IN-20160617

Download Infinix Note 2 X600 LTE Clone Firmware Flash File [Pac File]



Below is the Firmware Stock ROM [Pac File]  for Infinix Note 2 X600 LTE Clone Firmware

  • Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
  • Download Stock Rom (Pac) for your Android Device.
  • Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files:
  • Now, open UpgradeDownload.exe.
  • Once Spreadtrum Upgrade Tool is launched, connect your Android device to the computer (make sure your device is switch off).
  • Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the .Pac file (Stock ROM which comes as .Pac).
  • Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
  • During the flashing process your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
  • Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool. Once your Android Device is successfully restarted, Go to Settings > About Phone > Check firmware.

Infinix Note 2 X600 LTE Clone Firmware Flash File [Pac File] 
Infinix_Note_2_LTE_X600_Android_5.1_Pac_File
S02_Q04_S02_Q04_DA213_5.1_ANDROID_5.1_V09_Infinix_NOTE_2_LTE
Download Now


Infinix Note 2 X600 LTE Clone Firmware

Infinix_Note_2_LTE_X600_Android_5.1_Pac_File
X600-H533-B1-L-20151125
Download Now

MBO M9 MINI Flash File [Firmware]


Below is the Firmware / Flash File for MBO M9 MINI
How to Flash MBO M9 MINI with .bin file using Miracle Box below 

Requirment :

Miracle box or Any other Chinese Tools
SPD Feature PhoneS
USB CABLE
Computer
Brain
Flash Tutorial For Any SPD : Click here

Launch Miracle Box
Click on SPD tab
Tick Write
Under Choose type, Select the chip of the device you want to flash {6531 xxxx}
Click the small yellow folder
Navigate to the ROM/Firmware folder and select the bin file
Click Start button
You will see Scanning USB Serial port...
Connect device to PC while holding boot key (soft menu or call key)
Miracle will detect the phone and start flashing process
When you see Done! Flashing process is complete
Disconnect and boot up phone.

MBO M9 MINI Flash File [Firmware]

Download MBO V8 Stock ROM Firmware [Flash File]



MBO V8 Quick Specs.

Operating system Android v2.3.5 (Gingerbread)sim slots Dual SIM, GSM+GSMmodel V8brand MBOnetwork 4G: Not Available, 3G: Not Available, 2G: AvailableMULTIMEDIA
loudspeaker Yesfm radio Yesaudio jack 3.5 mmPERFORMANCE
performance Single Core, 1 GHz, Spreadtrum SC6820, 256 MB RAMdisplay 4.0 inches (10.16 cm), 480x800 px, 233 PPI, LCDstorage 512 MBcamera 0.3 MP Primary Camera, LED Flash
battery 1200 mAhram 256 MBchipset Spreadtrum SC6820graphics Mali-400processor Single core, 1 GHz, Cortex A5ram 256 MBDESIGN
thickness 10.5 mmwidth 66 mmheight 131 mmcolours Black,WhiteDISPLAY
display type LCDpixel density 233 ppiscreen size 4.0 inchesscreen resolution 480 x 800 pixelstouch screen Yes, Capacitive TouchscreenSTORAGE
internal memory 512 MBexpandable memory Yes, Up to 16 GBCAMERA
camera features Digital Zoomimage resolution 640 x 480 Pixelsresolution 0.3 MPflash Yes, LED FlashBATTERY
type Li-ioncapacity 1200 mAhNETWORK CONNECTIVITY
wifi Yes, Wi-Fi 802.11, b/g/nbluetooth Yesusb connectivity microUSB 2.0network support 2Gsim 1 2G Bands: GSM 1800 / 900 MHz GPRS:Availablesim 2 2G Bands: GSM 1800 / 900 MHz


Below is the Firmware / Pac File for MBO V8 

  • Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
  • Download Stock Rom (Pac) for your Android Device.
  • Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files:
  • Now, open UpgradeDownload.exe.
  • Once Spreadtrum Upgrade Tool is launched, connect your Android device to the computer (make sure your device is switch off).
  • Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the .Pac file (Stock ROM which comes as .Pac).
  • Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
  • During the flashing process your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
  • Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool. Once your Android Device is successfully restarted, Go to Settings > About Phone > Check firmware.
MBO V8 Stock ROM Firmware [Flash File]

Credit: romshillzz for Uploading...

MBO C5 Firmware Pac File [Flash File]

MBO C5 STOCK ROM / PAC FILE [Flash File]

Quick Specs OF MBO C5.Frequency: GSM 900 WCDMA2100 MHz 2G
Platform : Spreadtrum 6820/8810
Processor:1.3GHZ
Dual SIM Dual Standby
Screen:4.0′ WVGA 480*800 IPS
Momery:4GB+1GB
Built-in WIFI
Built-in support A-GPS
Media format:MP3,MP4,AVI,FLV,3GP
With bluetooth
Support FM Radio out
Color: black, white, golden
Support T- flash card
Battery:4L 1700mAh

Below is the firmware / Pac File for MBO C5 

  • Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
  • Download Stock Rom (Pac) for your Android Device.
  • Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files:
  • Now, open UpgradeDownload.exe.
  • Once Spreadtrum Upgrade Tool is launched, connect your Android device to the computer (make sure your device is switch off).
  • Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the .Pac file (Stock ROM which comes as .Pac).
  • Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
  • During the flashing process your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
  • Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool. Once your Android Device is successfully restarted, Go to Settings > About Phone > Check firmware.
MBO C5 Firmware Pac File

Oppo R829 Firmware / Stock ROM


Learn how to Flash Oppo Phone below

NEED PICTURE GUIDE JUST FOLLOW HERE

OPPO Firmware / Stock ROM Below

DOWNLOAD MORE MTK FIRMWARE FROM HERE

Extract SP Flash Tool and launch.
Now click scatter-loading button so that flash process can begin.
locate the scatter file of the device. It will be inside the folder of the rom you downloaded.
Untick Preloader (not really necessary but a great precaution) tick this if the device is completely DEAD.
Please make sure you untick DSP_BL if found on the list shown in SP Flash Tools especially when trying to flash devices with older chips like mt6572, mt6577 etc

Now click download button.

Power off the device and remove battery (if battery is built in don't worry just continue ).

Most new devices now require battery for flashing.

Connect the device to the computer with USB and wait for SP Flash Tool to detect it.

Hold volume down or volume up button and connect the device for easy detection.

Once phone is detected a red line will be seen at the bottom followed by a yellow line.

When flashing is completed, a green tick is shown on the screen. Older versions of so flash tool will show a green circle.

Insert battery back into the phone and reboot device


Oppo R829 Firmware / Stock ROM
Password: oppomobile.vn