Hot!

how to use sp flash tool to flash mtk devices


HOW TO UNBRICK/FLASH OR UPGRADE MediaTek (MTK) DEVICES

Hello, I will be showing you how to flash or unbrick dead MediaTek (MTK) devices like Tecno, Gionee, infinix, THL,Wiko etc. using SP Flash Tools. Just follow the steps below carefully and your phone will come back to life........

Very important!! Read this post here  before you follow the tutorial below 

Download an install MTK drivers from here. OR

Download and install MT65XX VCOM drivers from here

Download SP flash tool (latest version is preferable) from here.

Download the stock rom of the device you want to unbrick or flash from here.

Extract SP Flash Tool and launch.

see picture below



Now click scatter-loading button so that flash process can begin.




locate the scatter file of the device. It will be inside the folder of the rom you downloaded.


Untick Preloader (not really necessary but a great precaution) tick this if the device is completely DEAD.
Please make sure you untick DSP_BL if found on the list shown in SP Flash Tools especially when trying to flash devices with older chips like mt6572, mt6577 etc
Now click download button.



Power off the device and remove battery (if battery is built in don't worry just continue ).
Most new devices now require battery for flashing.
Connect the device to the computer with USB and wait for SP Flash Tool to detect it.
Hold volume down or volume up button and connect the device for easy detection.
Once phone is detected a red line will be seen at the bottom followed by a yellow line.
When flashing is completed, a green tick is shown on the screen. Older versions of so flash tool will show a green circle.
Insert battery back into the phone and reboot device.

If see any pop up error while trying to flash your device, Click here
and see if the post can solve your problem.






If your device boot loops after flashing, do a factory reset.

Enter into recovery by holding volume down and power button.

Scroll down the chinese menu and tap emmc to do a factory reset

If you don't like chinese, enter into recovery by holding volume up and power button.

When you see the android man press volume up an power button again to see menu list.

Select factory reset..

Reboot device


21 comments:

  1. What of SD card method?
    What is the procedure using x506 SD card lollipop

    ReplyDelete
  2. install custom recovery using flasiar
    download custom rom and place it to d root directory of ur sd card
    boot phone to recovery... mount system and install from sd ...wipe factory and reboot
    check link below for more ......
    http://www.9jarom.net/2016/05/how-to-install-xui-1n02-on-infinix-x510.html

    ReplyDelete
  3. I stumbled on this while doing my search, its a Nice piece you have here.
    Here is a Complementary post on How To Install Samsung Custom ROM On Tecno C8
    http://www.technologysage.com/2016/06/how-to-install-samsung-custom-rom-on-tecno-c8.html

    ReplyDelete
  4. i flashed x-bo v3+ but now turn white on display but i hear a sound that
    the phone has turned on help

    ReplyDelete
  5. How to flash lenovo a628t have try to use I could not flash help out

    ReplyDelete
  6. i need m8 x bo , mine is dead after flashing with a wrong file

    ReplyDelete
  7. Very grateful, it worked with success on infinix hot 3 !

    ReplyDelete
  8. please my tecno w4 rom is failed!!! help me !!!

    ReplyDelete
  9. please help me my tecno w4 rom is failed

    ReplyDelete
  10. please anyone with BLU STUDIO G D790Q lollipop. thx

    ReplyDelete
  11. New #Update Latest #Setup new free tools new #latestflashfile comming soon on pak4triack.blogspot.com

    ReplyDelete
  12. i have a xbo v8+ that i have flashed but after flash it went dead. pls help what can i do to revive it?

    ReplyDelete
  13. i used custom xbo v6 to flash xbo v8+, it load normal but is not carlibrating. any help here?

    ReplyDelete
  14. my own is fero supereme i need stock rom

    ReplyDelete